smartsolo, seismic sensor, jual seismic sensor, smartsolo igu-16

SmartSolo IGU-16

Name: Testingindonesia
Rating: 5

Category: Wireless Seismic Sensor Tags: dt-solo, jual seismic sensor, seismic sensor, smartsolo, smartsolo igu-16

Description

World’s First Smart Seismic Sensor

Makes Cost-efective High Density Seismic Possible

The seismic industry continues to demand that exploration is carried out at ever-greater scale and receiver density, while somehow attempting to balance the requirement to keep project costs under control. To provide the industry with a solution to this challenge, DTCC has developed the SmartSolo IGU-16 intelligent seismic sensor.

SmartSolo IGU-16 is based on DT-SOLO, the high-sensitivity geophone and focuses on the principal of seismic exploration which is known as 3W (Wave = high fidelity signal; When = accurate timing; and Where = the location), incorporated with electronics and software technologies in mobile internet era. This smart sensor provides adequate info for highest-quality seismic data acquisition while keeping its functions and structure as simple as possible. Electronics and software technologies are super reliable, mature and cost-effective in mobile internet era. These technologies are used for SmartSolo at maximum possible scale. The result: the geophone is something smart, reliable, user-friendly, cost-effective and could run in any harsh environment.

High-quality seismic data derives from high-quality seismic sensors. DT-SOLO is a high-sensitivity geophone specially designed for point receiver applications. It is well-known in the seismic industry as the top-quality high-sensitivity geophone which is widely used by contractors and equipment manufacturers.

High Quality
High Sensitivity
Super Reliable
Greater Savings
Low Distortion
Single Point Receiver
Industry Leader
Available in 10 Hz & 5 Hz

DMC, DCC, DHR

The Peripherals of SmartSolo IGU-16

Fast Data Harvesting Speed
3000 CHs @ 20 days @ 2ms in < 3.5 hrs
Highly Flexible System Configuration
Complete Software Suite

Spesification

Physical Specs	Size	95mm x 103mm x 118mm (without spike)
	Weight	1.1 kg (including internal battery and spike)
	Waterproof	IP67
	Operating Temperature	-40℃ to +70℃
	Battery	38.48 Wh

Operating Life @ 25°C	25 days @ 1ms continuous
	50 days segmented (12hours ON/12hours SLEEP)

Tech Specs	Sensor Specs DT-SOLO 10Hz (All parameters are specified at +25 °C in the vertical position unless otherwise stated.)	Natural Frequency	10Hz
		Coil Resistance	1800Ω
		Damping	Open Circuit Damping	0.51
			Damping with 20 KΩ	0.70
		Sensitivity	Open Circuit Intrinsic Voltage Sensitivity	85.8V/m/s(2.18V/in/s)
		Distortion	＜0.1%
	Sensor Specs DT-SOLO 5Hz (All parameters are specified at +22 °C in the vertical position unless otherwise stated.)	Natural Frequency	5Hz
		Coil Resistance	1850Ω
		Damping	Open Circuit Damping	0.60
			Damping with 43 KΩ	0.70
		Sensitivity	Open Circuit Intrinsic Voltage Sensitivity	80 V/m/s (2.03V/in/s)
		Distortion	＜0.1%
	Smart Electronics Specs (@ 1ms sample interval, 31.25 HZ, 25°C unless otherwise indicated)		Standard	HR
		ADC Resolution	24bits	24bits
		Sample Intervals	1,2,4 milliseconds	0.25, 0.5, 1, 2, 4 milliseconds
		Preamplifier Gain	0dB to 24 dB in 6 dB steps	0dB to 36dB in 6dB steps
		Anti-alias Filter	206.5 Hz @ 2ms (82.6% of Nyquist) selectable – linear phase or minimum phase	206.5 Hz @ 2ms (82.6% of Nyquist) Selectable – Linear Phase or Minimum Phase
		DC Blocking Filter	1HZ to 10Hz,1Hz increments or DC Removal	1Hz to 10Hz,1Hz increments or DC Removal
		GPS Time Standard	1ppm	1ppm
		Timing Accuracy	±10μs, GPS disciplined	±10μs, GPS disciplined
		Maximum Input Signal	2.5Vpeak @ Gain 0dB	2.5Vpeak @ Gain 0dB
		Equivalent Input Noise	0.71 μV @ 2ms @ Gain 12dB (Typical)	0.18µV @ 2ms @ Gain 18 dB
		Instantanteous Dynamic Range	116dB@ 2ms @ Gain 0dB	125dB @ 2ms Gain 0 dB
		Total Harmonic Distortion	<0.0005%	< 0.0002% @ Gain 0dB
		Common Mode Rejection	≥100dB	＞100 dB
		Gain Accuracy	<1%	＜0.5%
		System Dynamic Range	140dB	145dB
		Frequency Response	0 - 413Hz	0 - 1652Hz

Features

SmartSolo®

The Future of the Seismic Industry

Smaller crew size, less man power and simpler equipment

Lower operational cost
Less environmental impact
Improved HSE

Million channels capability

High channel density
Better image at lower cost

Super reliable, lower power consumption, longer operating time

High productivity
Lower operational cost

Highly efficient data harvesting and management

Lower operational cost
Better user experience

Reviews

There are no reviews yet.

Be the first to review “SmartSolo IGU-16”