Calibration kit for UCP1A/UCP1B CP probes


The Calibration Kit has been created to provide all the necessary components to enable customers to verify the accuracy of the readings on the Buckleys Contact and Proximity Probes so that ‘in-house’ verification certificates can be issued.

Providing the readings are correct, the silver/silver chloride screw-in half cell should be checked by using K-Series Reference Cells in a standard salt water solution.

To confirm the readings, three cells should be used and the sea water corrosion test mixture should be made up to a 3% solution.

Kit comprises:

  • 3 x screw-on K-Series reference electrode cells
  • Sea water corrosion test mixture
  • 3 x Adaptor leads
  • 1 x zinc test block
  • Full instructions for ‘in-house’ verification


  • Electrical connection: screw fit
  • Output: +208mV @ 25°C vs SHE
  • Accuracy: ±5mV @ 25°C vs SHE
  • Temperature coeff: -0.64mV per/°C
  • Temperature range: 0 - 40 °C
  • Working life: up to 1 year
  • Dimensions: 155mm long x 25mm diam.
  • Packed weight (calibration kit): 1.05Kg
  • Dimensions (packed): 26cm x 14cm x 30cm
Note: Due to ongoing technical developments, all stated information is typical and is subject to change without notice or obligation. Commodity Code: 9027900000


There are no reviews yet.

Be the first to review “Calibration kit for UCP1A/UCP1B CP probes”

Your email address will not be published. Required fields are marked *