Ultrasonic Thickness Gauge NOVOTEST UT-1M-IP


Coating Thickness Gauge NOVOTEST UT-1M-IP is a special version of ultrasonic thickness gauge, it is designed to measure the thickness of various materials and products for one-way access in difficult climatic conditions – in dusty rooms, in high humidity, in the rain – when the use of a conventional ultrasonic thickness gauge is impossible.

It is used to control the thickness of materials such as glass, metals and alloys, polymers, plastic and many others. Objects can be pipes, rolled products, structures, products and parts for various purposes and shapes.

Testing Indonesia – Kami sebagai perusahaan yang bergerak pada bidang system dan monitoring system, kami Jual Coating Thickness Gauge dengan kualitas terbaik dan pastinya dengan harga yang bersahabat. Untuk pemesanan pada alat dan informasi lebih lanjut silahkan klik DISINI atau dengan menghubungi kami melalui :

WA : +62-813-992-919-09 (Zulfikri)

Phone : 021-2956-3045

Email : Sales@testingindonesia.com

Office : Jl.Radin Inten II No 61 B Duren Sawit Jakarta Timur


  • Unique protection from dust and moisture, previously not available in the market of ultrasonic thickness gauges of general purpose. By default the device comes with a degree of dust-moisture protection IP65. This protection degree can be increased up to IP67 (submerged in water) at order;
  • Unprecedented autonomy of the device – increased up to 200 hours continuous operation time of the thickness gauge;
  • Special rubber lining on the side surfaces of the casing facilitates the convenient retention of the thickness gauge in the user’s hand;
  • Device has light weight and dimensions, in comparison with similar protected thickness gauges;
  • Saved data can be transmit to PC;
  • Material selection and automatic setting of ultrasound velocity;
  • Large graphic display of high contrast and backlight;
  • Display of measured thickness in mm and inches;
  • Convenient menu in the device;
  • Wide choice of UT probes with preset settings in the device;
  • Modes of statistical processing of measurements;
  • Ability to restore factory calibrations;
  • Ability to adjust all parameters of the acoustic path;
  • Ability of further adjusting the user gain directly from the measurement mode;
  • Wide range of testing;
  • Mode of audible and visual alarm when leaving the established ranges.



Measuring thicknesses range , mm:

  • Probe 10MHz – P112-10-6 / 2
  • Probe 5MHz – P112-5-10 / 2
  • Probe 2,5MHz – P112-2,5-12 / 2
0.8 … 500 or more

  • range 0.8-30 mm
  • range 1-75 mm
  • range 2-300 mm
Probe dimensions, mm:

  • Probe 10MHz – P112-10-6 / 2
  • Probe 5MHz – P112-5-10 / 2
  • Probe 2,5MHz – P112-2,5-12 / 2
  • D12×15 mm
  • D17×20 mm
  • D20×21 mm
Diameter of probe contact area, mm:

  • Probe 10MHz – P112-10-6 / 2
  • Probe 5MHz – P112-5-10 / 2
  • Probe 2,5MHz – P112-2,5-12 / 2
  • 9 mm
  • 14 mm
  • 16 mm
Size of plate:

  • Probe 10MHz – P112-10-6 / 2
  • Probe 5MHz – P112-5-10 / 2
  • Probe 2,5MHz – P112-2,5-12 / 2
  • 6 mm
  • 10 mm
  • 12 mm
Setting range of the ultrasonic velocity, m / s1000-17000
Discrete readings on the digital indicator, mm0.1
Response time, with no more than1
Basic measurement accuracy, mm± (0,01 T+/- 0.05)
Echo-Echo mode (through coating measuring), max thickness of coating, mm1
StandardsASTM E797
Storage of measurement results256
Overall dimensions, mm120x60x25
Operating temperature range, ° C-5 to +40
Power supply3 AA batteries
Time of continuous work hours, not less, hup to 200
Weight of electronic unit with battery, no more, kg0.2

Availabe Options

  • Couplant
  • UT-probes
  • Calibration blocks

Standard Packages

  • Electronic unit Ultrasonic Thickness Gauge
  • Transducer (probe) – 1 pc
  • AA batteries – 3 pcs
  • Charger
  • Cable for PC
  • Operating manual
  • Case



There are no reviews yet.

Be the first to review “Ultrasonic Thickness Gauge NOVOTEST UT-1M-IP”

Your email address will not be published. Required fields are marked *