UTM (Twin Column Type) – UNITEST M2

Features

  • Universal Testing Machine is a representative test equiptment for physical properties. It is capable of measuring load, strength, elongation of products or materials such as rubber, film, plastic, metal, etc.
  • Basically, Tests of fullering, tearing, compression, flexural, desquamation are available. Hardness(ILD, IFD) , static load, repeat fatique tests, the friction coefficient measurement test are also available
  • There are largerly two universal testing machine, mechanical machine and hydraulic machine. The major part of mechanical universal testing machine such as servo motor, gear, ball screw is constructed from foreign made(Japan). So, it has precision and low noise. Hydraulic universal testing machine realized the excelient reproducibility and accuracy by adopting a hydraulic servo system
  • It uses dedicated software and was made for user’s convenience. Therefore, various graphs, unit conversion, conversion to excel are easy. Data storage, management, and can be printed. In addition, users can change some details through an order
  • With an environmental chamber, materials tests in constant temperature and humidity, low or high temperature are possible

Spesification

ModelUNITEST M2-2UNITEST M2-5
Max. Load Capacity20 kN50 kN
Load Accuracy+ 0.5%
Column TypeTwin Column
Vertical Test Space  (without accesories)1350 mm1100 mm
Crosshead Speed Range0.01 ~ 500 mm/min0.01 ~ 500 mm/min
Return Speed500 mm/min500 mm/min
Load Resolution1/50,000
Machine Controller Touch Type Servo Controller (Position Control Type)
Position Control Accuracy+ 0.1%
Driving SystemBall Screw & Linear Guide Type
Driving MotorAC Servo & Driver (Japan)
Auto FunctionAuto Start, End, Return System
Test CategoryTensile, Tear, Peel, Compression, Bending, Repeat, etc.
Safety DeviceEmergency Stop, Up-Down Limit (Proximity Sensor Type). Over Load
Dimension (W x D x H)850x 700 x 2,280 mm840x 700 x 1900 mm
Net WeightApprox. 360 kgApprox. 360 kg
PowerAC 220V, 2P, 50/60 HzAC 220V, 2P, 50/60 Hz

 

ModelUNITEST M2-10UNITEST M2-20UNITEST M2-30
Max. Load Capacity100 kN200 kN300kN
Load Accuracy+ 0.5%
Column TypeTwin Column
Vertical Test Space  (without accesories)1350 mm1100 mm1100 mm
Crosshead Speed Range0.01 ~ 300 mm/min0.01 ~ 300 mm/min0.01 ~ 300 mm/min
Return Speed300 mm/min300 mm/min300 mm/min
Load Resolution1/50,000
Machine Controller Touch Type Servo Controller (Position Control Type)
Position Control Accuracy+ 0.1%
Driving SystemBall Screw & Linear Guide Type
Driving MotorAC Servo & Driver (Japan)
Auto FunctionAuto Start, End, Return System
Test CategoryTensile, Tear, Peel, Compression, Bending, Repeat, etc.
Safety DeviceEmergency Stop, Up-Down Limit (Proximity Sensor Type). Over Load
Dimension (W x D x H)900 x 800 x 2,060 mm1,305 x 935 x 2560 mm1,305 x 935 x 2560 mm
Net WeightApprox. 580 kgApprox. 2,050 kgApprox. 2,050 kg
PowerAC 220V, 3P, 50/60 HzAC 220V, 3P, 50/60 HzAC 220V, 3P, 50/60 Hz

Reviews

There are no reviews yet.

Be the first to review “UTM (Twin Column Type) – UNITEST M2”

Your email address will not be published.