A1020-MIRA-LITE
concrete testing A1020 MIRA LITE
concrete testing A1020 MIRA LITE
concrete testing A1020 MIRA LITE

A1020 MIRA LITE

Categories: , , Tag:

Description

THE MOST PORTABLE AND HANDY TOMOGRAPH FOR REINFORCED CONCRETE INSPECTION

Real-time B-scan image
• New generation of wear-proof DPC transducers
• Outstanding near-field resolution
• Optional Full-3D acquisition mode

Visualization by INTROVIEW®
• Integral assessment by 3D imaging
• Novel crack sizing functionality

A1020 MIRA-lite is a low-frequency ultrasonic tomography system for manual ultrasonic testing, 2D and 3D visualization and quality evaluation of concrete and reinforced concrete structures.

The instrument is a hand-held lightweight low-frequency ultrasonic device of general purpose. It is a fully autonomous system used for acquisition, topographic processind and evaluation of pulse-echo ultrasonic data. The sensor system contains a matrix antenna of 32 (8 blocks with 4 elements in each) low-frequency broadband transverse wave dry point contact (DPC) transducers with ceramic wear-resistant tips for long-term couplant-free operation on rough surfaces.

The A1020 MIRA-lite is dedicated for non-destructive testing constructions made of concrete, reinforced concrete and stone with one-sided access. It allows estimation of material integrity by detection of local inclusions, cavities, voids, delaminations, not grouted areas and cracks as well as object thickness measure. Typical application fields of the system are reinforced-concrete buildings, facilities, bridges, tunnels, highways, airdromes in construction and in operation / maintenance. Further the instrument can be used in the mining industry to evaluate the quality of the exploitable minerals.

The A1020 MIRA-lite allows quick and efficient testing of the large objects with its three-dimensional visualization and documentation of the inspection results by means of provided software INTROVIEW-CONCRETE by ACS (in delivery volume).

Application

Inspection of concrete constructions up to 1200 mm thickness for the purpose of evaluation of consistency of the construction.

Search for foreign inclusions, cavities, voids, delaminations, leaks of filling and cracks in the concrete objects, reinforced concrete objects and natural stone.

Search for plastic and metal pipes of a diameter more than 10 mm in reinforced concrete.

Evaluation of condition of the channels with stressed reinforcement in reinforced concrete bridges.

Inspection of understructures, columns, overhead covers in cast-in-place constructions to detect voids and leaks of filling.

Search for voids and cavities back of liner plates of underground and railway tunnels.

Inspection of refractory blocks of the glass blowing furnace.

Estimation of the thickness of the concrete cover and depth of coverage reinforcement.

Thickness measurement of the testing object at one-sided access.

Detailed registration of the results obtained.

Spesification

Sensor systemBuilt-in matrix antenna array
Number of transducers in the antenna array32
Type of the transducers used in the antenna arrayLow-frequency broadband transversal Dry Point Contact transducers with ceramic wear proof tips
Nominal transducer frequency50 kHz
Analog band width10 to 100 kHz
Maximum penetration depth in concreteup to 1 000 mm
Maximum penetration depth in reinforcement concreteup to 400 mm
Period of continuous operation of the instrument powered from the accumulator, no less than8 hours
Average service life, no less than5 years
Operating temperature-10 to + 50 °C
Transducer array dimensions220 x 110 x 90 mm
Electronic block dimensions260 X 165 X 85 mm
Screen dimensions5,7’’
Real-time visualization:Up to 8 Hz
Number of A-Scans in thomography synthese64
Visualization modes on board: Visualization modes by INTROVIEW:A-Scan, cross-sectional B-Scan Panorama B-, C-, D-Scan, 3D-View (Texture Mapping, ISO-surface, Maximum Intensity Projection)
Data interfaceUSB 2.0

Standard Packages

DELIVERY KIT

• А1020 MIRA Lite – ultrasonic tomograph • Antenna array M4002 0.05A0R220Х110PS • Net adaptor with cable 220V-15V • USB A – Micro B cable • Checking sample • Case • Vizualisation and evaluation Software INTROVIEW – 12 month license

Download Media

• Operation manual 
• Advertising booklet

Reviews

There are no reviews yet.

Be the first to review “A1020 MIRA LITE”

Your email address will not be published. Required fields are marked *

Related products