UPVT A1410 PULSAR

Description

A compact, ergonomic and easy to handheld ultrasonic pulse velocity tester for quality assessment of concrete compliant with valid international standards.

The instrument is made of light-weight shockproof plastic and operates two dry-point-contact transducer arrays for through-transmitting up to 2 meters of concrete. Wear resistant wearproof ceramic tips of the transducers are insensitive to the surface condition and allow comfortable and robust operation on site by arbitrary surface condition. Hence, there is no need to apply coupling gel to prepare object surface for testing.

The device possesses non-volatile memory allowing storing of 50.000 measurements (the results can be grouped) and USB port for transferring measured data to the external PC.

The world-first ultrasonic pulse velocity testing instrument for couplant-free on-site quality assessment of concrete structures with up to 2 meters thru-transmission capability.

Additional information

Building

building

Spesification

Type of ultrasonic transducersUndamped DPC transducers
Transducer configurationArray of 7 x DPC transducers, daisy wheel pattern
Operating frequency, kHz50
Set delay range, µs0 to 20
Adjustable range of the base size, mm50 to 2500
Automatic Gain Control (AGC)switchable
Maximum thickness of the inspection object, m2.5
Indication resolution of the propagation time of ultrasonic waves, µs0.1
Indication resolution of the propagation velocity of ultrasonic waves, m/s10
Measurement range of the sound velocity, m/s1.000 to 15.000
Measurement range of sound propagation time, μs0,1 to 10.000
Rated supply voltage, V3.3
Period of continuous operation with the display brightness 80%, temperature 25 degrees Сelsius, hours16
Display2,8”, 320×240 pixel
Overall dimensions of the electronic unit, mm., max.230×125×65
Weight of the electronic unit, gr., max.420
Mean time between failures, hours18,000
Regular service life, years5

Application

The instrument is suitable for compressive strength evaluation of concrete. The evaluation is based on correlation of longitudinal ultrasonic wave velocity in concrete with its mechanical properties. Measurements are performed by thru-transmission of inspection object by means of two transducer arrays. Further possible areas of application of A1410 are: • Evaluation of the load-carrying ability of concrete backbones and posts. • Evaluation of porosity and fissuring of concrete. • Evaluation of anisotropy in composite materials. • Evaluation of the concrete aging The A1410 PULSAR complies with following international standards: The given technical specifications conform with the following international standards: – DIN EN 12504 4; – BS 1881: Part 203 : 1986; – ASTM C597 16; – IS 13311 1.

Standard Packages

NameQuantity, pcs.
Electronic unit of the Ultrasonic pulse velocity tester A1410 Pulsar1
Antenna array M1001 0.05A0D25PL1
LEMO-LEMO single cable 3 m1
Adapter 220 V – USB1
Cable USB A – Micro B1
Test sample1
Hard case1
Warranty certificate1
Operation Manual1

Download Media

FIRMWARE FILES
DOCUMENTS

Reviews

There are no reviews yet.

Be the first to review “UPVT A1410 PULSAR”

Your email address will not be published. Required fields are marked *